GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30
GEX 20/25/30

Application

Indoor/Outdoor Manufacturing, Warehousing & Shipping/Receiving

Features

In the past, one truck would be used for outdoor applications and another truck would be used for indoor warehousing. Now one GEX can handle both environments, leaving you with the thought... two "hands" aren't always better than one.


Features

  • Certain adjustments can be password protected to allow only authorized operators to make adjustments

  • Provides excellent lateral stability

  • Service brake (Foot brake)

  • Same motors for E & EE

  • Allow servicing mechanic to check fault codes without service tool

  • Drive Motors & Axles

  • GEX 30/32 can accommodate 60 kwh battery

  • Regen & Wet Disc Brakes

  • Dual/powered reversing for tighter turns

  • Indicates the current alarm code and stores previous alarm codes for quick access

  • The operator can select from 4 pre-set performance modes

  • Alarm Codes

  • Inside wheel power reverses in tight turns preventing scuffing of steer tires like conventional 4-wheel trucks

  • 80 Volt 100% AC System

  • GEX 20/25 can accommodate 54 kwh battery

  • Rivals IC truck performance in speed, acceleration and gradeability

  • Built with long life lining material

  • Suitable for Wet Applications

  • Thermal and stall protection

  • Reduces truck travel speed in turns

  • Stable Platform

  • Accelerator release (Proportional to accelerator position)

  • Zero turn steer axle provides the tightest possible turning radius

  • Fully Adjustable/Programmable

  • Enclosed and oil cooled for smooth, quiet operation

  • Powered Reversing Drive Motors

  • Less downtime

  • Relays steer tire position to control

  • Only requires one receptacle via single battery connector

  • CLARK moved back the steer axle, dropped the battery compartment and moved all major components lower

  • Supported on gas springs for easy service access from a standing position

  • Change of direction (Proportional to accelerator position)

  • Provides added traction, especially on wet or uneven surfaces

  • Enclosed, brushless

  • Easily Serviced

  • Higher voltage = lower line loss & heating = greater efficiency

  • LCD Dash Display

  • Password Protected

Links

  • Features

    Features

    • Certain adjustments can be password protected to allow only authorized operators to make adjustments

    • Provides excellent lateral stability

    • Service brake (Foot brake)

    • Same motors for E & EE

    • Allow servicing mechanic to check fault codes without service tool

    • Drive Motors & Axles

    • GEX 30/32 can accommodate 60 kwh battery

    • Regen & Wet Disc Brakes

    • Dual/powered reversing for tighter turns

    • Indicates the current alarm code and stores previous alarm codes for quick access

    • The operator can select from 4 pre-set performance modes

    • Alarm Codes

    • Inside wheel power reverses in tight turns preventing scuffing of steer tires like conventional 4-wheel trucks

    • 80 Volt 100% AC System

    • GEX 20/25 can accommodate 54 kwh battery

    • Rivals IC truck performance in speed, acceleration and gradeability

    • Built with long life lining material

    • Suitable for Wet Applications

    • Thermal and stall protection

    • Reduces truck travel speed in turns

    • Stable Platform

    • Accelerator release (Proportional to accelerator position)

    • Zero turn steer axle provides the tightest possible turning radius

    • Fully Adjustable/Programmable

    • Enclosed and oil cooled for smooth, quiet operation

    • Powered Reversing Drive Motors

    • Less downtime

    • Relays steer tire position to control

    • Only requires one receptacle via single battery connector

    • CLARK moved back the steer axle, dropped the battery compartment and moved all major components lower

    • Supported on gas springs for easy service access from a standing position

    • Change of direction (Proportional to accelerator position)

    • Provides added traction, especially on wet or uneven surfaces

    • Enclosed, brushless

    • Easily Serviced

    • Higher voltage = lower line loss & heating = greater efficiency

    • LCD Dash Display

    • Password Protected

  • Downloads & Documentation

    Links

Contact

Contact

Consignment

Request a Service

×

Allied Equipment Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location

×

Allied Equipment Employee Portal